PCD Inserts

We manufacture PCD Tools with advanced processing machine and control the product quality from the very beginning, which leads to PCD tools with high accuracy and good quality with consistency.

CBN Inserts

CBN is an artificially synthesized material exceeded in hardness only by diamond, while still offering superior wear resistance to Carbide in certain applications, ARROW TOOLS Pvt. Ltd. offers over all grades of CBN, allowing us to find the perfect choice based on your application.


Our knowledge of various carbide step tools allows us to manufacture solid carbide step drills and high speed steel drill that are right for the job. We are the area's foremost leader in creating specialized solid carbide & HSS step drills for all types of applications. Whether the customer supplies us with a CAD drawing or hand sketch, we will help manufacture what they need with the utmost accuracy. Let Arrow Tools create the perfect through coolant or solid carbide tool that you need to get the job done right.

CT Brazed Tools

For many kind of high precision jobs, the carbide brazed tool remains the best solution. It is still an economic way compared with inserts and tips. Especially suitable for Swiss type lathes and small work pieces, these tools can be ground by yourself and used for different specific application.

HSS Drill

High-speed steel (HSS) is a form of tool steel. HSS bits are hard and much more resistant to heat than high-carbon steel. They can be used to drill metal and many other materials at greater cutting speeds than carbon-steel bits and have largely replaced carbon steels.

End Mill

The HSS end mills should be used when machines or work piece clamping configuration is not rigid, where cutting speed is low, or for very tough and interrupted cutting conditions. We manufacture various end mill configurations including finishers, rougher’s, ball nose, dovetail, chamfering, T-slot, counter bores, corner rounding tools and woodruff cutter.


Countersink cutters may be used in all aerospace applications using adjustable or micro-stop countersinking units with a threaded shank drive. Our line of countersink cutters are manufactured from high-speed-tool steel, precision-ground to exacting tolerances and form-relieved to insure concentricity of countersink angle. We manufacture a complete line of high speed steel stop countersinks, carbide-tipped stop countersinks with integral pilot, pilots for carbide-tipped stop countersinks, reverse spot facers, high-speed-steel hollow cutters, rivet shavers, high-speed-steel six-flute chatter less countersinks, counter bores, counter bore pilots and paint cutters.


• These universal plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly. • Widely used in electrical fittings.the retainer clips are made of high quality plastic, have a good fit. • Apply for front bumper, fender, radiator grille, body mouldings, fuel tank, splash shield, wheel apron panels, panels, etc.


These feedthrough grommets offer outstanding protection when wires and cables are fed through exit points or gaps; besides the mechanical protection the feedthrough grommets insulate, protect from touch and dampen vibrations. Grommets sit in electrical installations to provide protection against sharp edges and strain relief to the cables that feed through. Often, when holes are cut into panels, they leave a sharp edge. The grommet sits in this hole to provide a bumper around the edge. This bumper protects the wires that pass through


The most common and simplest types of seal with excellent sealing properties and durability. Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc., They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30°C to +120°C. Highly resistant to many chemicals, petroleum,diesel, LPG etc.


We produce wide range of solid carbide reamers for all materials. Reamers are available with straight and helical flute and a 45° lead cutting angle. Reamer tolerances is H7, it gives high precision and accurate diameter.

Center Drill

The centre drill is specially designed for complicated industrial purpose. These drills are provided with two-sided drill mouth that makes it long lasting. Both the sides are provided with different diameters that enable the two different drill sizes from single drill. These are manufactured from high-grade raw material that is procured from reliable vendors. Additionally, our experts take care that they are of high quality standard. Available: A type, B type & R type.

Step Drill

The step drill bit drills holes by rotating in a clockwise direction, through metal sheets of up to a quarter inch thick. Each step in the drill enlarges the original hole. The smallest bits are self-starting in that they need no pilot drill to start off the hole.

Indexable Milling Cutting Inserts

We are ahead in manufacturing and supplying an extensive array of Milling Tools with Indexable Cutting Inserts, fabricated from high grade raw materials, these devices are superb in quality and highly durable. Devices offered by us are extensively recommended for their sturdy construction, dimensional accuracy and application specific designs.

Threaded Shank Adapter Drills

Threaded shank adapter drills are made from cobalt high speed steel and specifications with 135-degree heavy-duty split points and surface treated for drilling hard, tough, high-tensile-strength materials. When drilling low-tensile-strength materials, the type “D” cobalt aircraft drill will have a significantly greater tool life than the NAS 965 type “B” high-speed steel adapter drill, resulting in a much lower cost per drill.

Side-and-face cutter

The side-and-face cutter is designed with cutting teeth on its side as well as its circumference. They are made in varying diameters and widths depending on the application. The teeth on the side allow the cutter to make unbalanced cuts (cutting on one side only) without deflecting the cutter as would happen with a slitting saw or slot cutter (no side teeth).


Ball nose cutters or ball end mills are similar to slot drills, but the end of the cutters is hemispherical. They are ideal for machining 3-dimensional contoured shapes in machining centers, for example in moulds and dies.

Woodruff cutter

With thorough knowledge of the industry, we are engaged in manufacturing woodruff cutters. These cutters are designed and manufactured by the professionals using quality raw material, which we procure from esteemed vendors of the market. Before the final dispatch, a group of quality controllers rigorously inspects the functionality of these cutters on varied industry laid grounds.

Fir Tree Milling Cutter

We manufacture this cutter according to customer applications or special requirements. Maximum process reliability thanks to minimal cutting forces and yet very high material removal (Q/min.) at the same time. Only a small number of special milling tools are required.



Trepanning Cutter

For machining outside diameters such as studs and recesses in castings.